 |
|
| ArcWriter Standard System Components: |
| • Dual-gas mechanized marking torch |
| • Power Supply |
| • Leads |
| • Arc voltage control board (optional) |
| • Current control panel (optional) |
| • Mounting and stand-off accessories (optional) |
| |
| ArcWriter Performance Data: |
| • Light Marking |
Will be clearly visible on the surface of the freshly scored plate. |
| • Heavy Marking and Scoring |
Will be clearly visible on the surface of the freshly scored playe. Dimensional characteristics controlled by adjusting current, gas type and marking speed. |
| • Punch Mark or Dimple |
Will be round with dimensional characteristics controlled by adjusting current, gas type and dwell time. |
| |
| ArcWriter Power Supply: |
| • Electrical |
|
| Rated OCV |
235 VDC at rated input Voltage |
| Output Current |
4-19 amps, adjustable in 1-amp increments |
| Output Voltage |
120 VDC |
| Duty Cycle at 40 ° C |
100% (19 amps, 120 VDC) |
| Input Voltage |
200V, 3PH, 50-60Hz ι 208V, 3PH, 60 Hz ι 240V, 3PH, 60Hz ι 400V, 3PH, 60Hz ι 440V, 3PH, 60Hz ι 480V, 3PH, 60Hz ι 600V, 3PH, 50-60Hz |
| • Dimensions and Weight |
| Depth |
28.2 inches (716 mm) |
| Width |
12.6 inches (716 mm) |
| Height |
18.7 inches (716 mm) |
| Weight |
100 pounds (55 kg) |
| • Gas Requirements |
|
| Plasma Gas |
Air or H5 (premixed industrial grade gas containing 5% hydrogen and 95% Argon) |
| Shield Gas |
Air |
| • Gas Quality |
|
| Air |
Clean, dry and oil-free |
| H5 |
5% hydrogen, 95% Argon premixed |
| • Flow Rates and Pressures |
|
| Plasma Gas |
60 scfh (28 I/min) @ 100 psi (6.9 bar) supplied to power supply pressure regulator |
| H5 |
300 scfh (141 I/min) @ 100 psi (6.9 bar) supplied to power supply pressure regulator |
| |
| ArcWriter Plasma Torch: |
| Type |
Dual Gas, mechanized |
| Gas |
Plasma and Shield (refer to gas requirements) |
| Starting Method |
Contact Arc |
| Cap Sensor |
Pneumatic |
| Deminsions and Weight |
|
| Diameter |
1.5 inches (38.1 mm) |
| Length |
11 inches (280 mm) |
| Weight |
1.5 pounds (0.8 kg) |
