Related Links

 

HyPerformance HPR130XD

HySpeed Plasma HSD130 is an easy-to-use oxygen plasma system that is more productive and more cost-effective than other metal cutting solutions such as oxyfuel, air plasma, and non-LongLife oxygen plasma systems.

  • Virtually dross-free cutting capacity
    - mild steel 16 mm (5/8")
  • Production pierce capacity
    - mild steel 25 mm (1")
  • Maximum cutting capacity (edge start)
    - mild steel 38 mm (1 1/2")
  • Overview
  • Specifications
  • Benefits

Easiest plasma system available on the market for oxygen and air plasma cutting - easy to install, easy to run, easy to troubleshoot. With our patented LongLife technology and 100% duty cycle, HySpeed Plasma is in a class of its own.
Capacity 
Mild Steel
Dross free
Production (pierce)
Severance (edge starts)
16 mm (5/8") 
25 mm (1") 
38 mm (1-1⁄2")
Stainless Steel Production (pierce)
Severance (edge starts)		 20 mm (3/4")
25 mm (1")
Aluminum Production (pierce)
Severance (edge starts)		 20 mm (3/4")
25 mm (1")
Speed*
(Mild steel)
Book specification at highest output current		 12 mm (1/2")
2200 mm/m
(80 ipm)
Cut angle ISO 9013 range** 4
Weldability
Ready to weld
Process gases
by material
(Plasma/shield)		 Mild steel

Stainless steel


Aluminum
 02/Air, Air/Air

Air/Air, N2/N2,
F5/N2, H35/N2

Air/Air, H35/N2
Process amps
(Cutting)		 Not all processes available
for all materials		 45-130

* Note: Take care in comparison: competitors often show maximum cutting speeds rather than speeds that deliver the best cuts, as shown above. Cut speeds listed above deliver best cut quality, but cut speeds can be up to 50% faster.

** ISO 9013 is a standard that defines cut quality of thermally cut parts. The lower the range (range 1 is the lowest), the smaller the angle on the cut face. Cut angle in range 4 is better than in range 5.
Ease of use
  • Easiest plasma system available on the market for oxygen and air plasma cutting - easy to install, easy to run, easy to troubleshoot.
  • Diagnostics display greatly simplifies troubleshooting and service, which leads to greater up-time for you.
  • Fewer consumable parts and quicker consumable changeout means reduced downtime
Incredibly productive
  • With the fastest cut speeds in this class, rapid pierce, and minimal secondary operations, you will be more productive.
  • Patented LongLife technology significantly improves consumable life for both oxygen and air processes.
  • 100% duty cycle for the most demanding production requirements.
  • Fastest cut speed per amp compared to its closest competitors.

Unmatched reliability
  • Rigorous, extensive testing, backed by four decades of experience, guarantees the Hypertherm quality you know you can count on.
  • Endured rigorous reliability and exhaustive life testing procedures equivalent to over 10 years of use in operating environments from -10°C to +40°C (+14°F to +104°F).
  • Dramatically reduced number of internal parts; less than half compared to other systems on the market. Studies have shown that fewer parts directly relates to greater reliability.
  • Designed for easy access to components and simplified service, to keep you up and running.
  • Self-diagnostics are performed automatically at startup and continually throughout the cutting process. This ensures the system is operating at peak performance.