Inova Control Console:
 Input Power 115 VAC 60Hz. /230 VAC 50hz.
 Input Current 3 amps / 1.5 amps
 Height 6.35 in. 161 mm.
 Width 15.5 in. 394 mm.
 Depth 12 in. 305 mm.
 Weight 30 lbs. 13.6 kg.
 Arc Voltage Range 50-250 VDC
 
 Inova Positioner:
 Positioning Speed- HD Model 500 ipm. 12.7 m/min.
 Positioning Speed-S Model 600 ipm. 15.2 m/min.
 Height 27.5 in. 699 mm.
 Width 4.4 in. 112 mm.
 Weight 15 lbs. 6.8 kg.
 Maximum Stroke 9.2 in. 234 mm.
 Lifting Capacity- HD Model 50 lbs. 23 kg.
 Lifting Capacity-S Model 25 lbs. 11 kg.
 
 Inova Features:
 Arc Voltage Control
     • DSP servo system is the most advanced control available

     • Rapid responce means arc voltage control available for high, intermediate or
       low-speed arc cutting
 Initial Height Positioning
     • Patented plate sensinig technique requires no extermal switches or devices

     • Manual positioning if automatic initial height positioning is not desired
 Programmable Partial Raise
     • Allows retraction distance to be set between 0' and dull raise

     • improves cycle time and output
 Arc Voltage Control Limiter
     • Prevents torch damage during kerf crossing
 Cycle Complete Signal
     • Minimizes cycle time by alerting the machine controller that the plasma torch
       has been fully retracted.
 Gas Preflow
     • Starts simultaneously with initial torch height positioning

     • Saves several seconds on each cut, allowing more cut pieces per hour
 Retraction Delay
     • Selectable delay time allows current slope-down to occur prior to retracting
       torch, extending electrode life
 Corner  
     • Allows the arc voltage control to be disabled while cutting

     • Prevents the torch from driving into the workpiece during corners or when
       initially piercing heavy plate.