Related Links

 

Powermax 65

Powermax 65
Operating data
Mechanized pierce capacity 1/2" (12 mm)
Gouge capacity 10.7 lbs. (4.8 kg) per hour
Groove profile .14" (3.5 mm) D x .26" (6.6 mm) W
  • Overview
  • Benefits
  • Specifications

Offering the latest technological innovations, like Smart Sense™ technology to automatically adjust the gas pressure, the Powermax65 helps you do more than ever before. Four Duramax™ torch styles provide greater versatility and enable operators to select the right tool for the job.
Applications
  • Hand cutting
  • Gouging
  • Mechanized cutting
  • - X-Y Table
  • - Track systems
  • - Pipe systems
  • - Robotic systems
Key power supply advantages
  • Smart Sense™ technology automatically adjusts the gas pressure according to cutting mode and torch lead length for optimal performance.
  • Boost Conditioner™ circuit (on CSA models) improves performance on low-line voltage, motor generators, and fluctuating input power.
  • FastConnect™ torches, optional CNC interface, and four work lead styles increase versatility for handheld and mechanized use.
  • Simplified control panel with LCD screen for easy operation.
Key torch advantages
  • 15° and 75° Duramax™ series hand torches enable operators to easily select the right tool for the job. The handle is more heat resistant and performs at least five times longer in high impact tests than previous torches.
  • Standard and short-barreled Duramax series machine torches allow a wide variety of mechanized applications with X-Y tables, track systems, pipe and robotic cutting systems.
  • Conical Flow™ nozzle increases arc energy density for superior cut quality with little dross.
  • Patent pending shield reduces dross buildup and enables smoother drag cutting for a better cut.

 Specifications

Input Voltages 
 CSA

CE		 200 – 480 V, 1-PH, 50/60 Hz
200 – 600 V, 3-PH, 50/60 Hz
400 V, 3-PH, 50/60 Hz
Input Current @ 9 kW CSA

CE		 200/208/240/480 V, 1-PH, 52/50/44/22 A
200/208/240/480/600 V, 3-PH, 32/31/27/13/13 A
380/400 V, 3-PH, 15.5/15 A
Output current   20 - 65 A
Rated output voltage   139 VDC
Duty cycle @ 40°C (104°F) CSA


CE		 50% @ 65 A, 230 – 600 V, 1/3-PH
40% @ 65 A, 200 – 208 V, 1/3-PH
100% @ 46 A, 230 – 600 V, 1/3-PH
50% @ 65 A, 380/400 V, 3-PH
100% @ 46 A, 380/400 V, 3-PH
Open circuit voltage (OCV) CSA
CE		 295 VDC
270 VDC
Dimensions with handles   19.7" (500 mm) D; 9.2" (234 mm) W;
17.9" (455 mm) H
Weight with 25' (7.6 m) torch CSA
CE		 64 lbs (29 kg)
57 lbs (26 kg)
Gas Supply   Clean, dry, oil-free air or nitrogen
Recommended gas inlet
flow rate / pressure		 Cutting:    400 scfh; 6.7 scfm (189 l/min) @ 85 psi (5.6 bar)
Gouging:  450 scfh; 7.5 scfm (212 l/min) @ 70 psi (4.8 bar)
Input power cable length   10' (3 m)
Power supply type   Inverter - IGBT


Engine-driven generator operation

Engine Drive
Rating (kW)
System Output
(amps)
Performance
(arc stretch)
15
65
Full
12
65
Limited
12
40
Full
8
40
Limited
8
30
Full


Cut Chart

Material Thickness Current Maximum cut speed*
  inches mm
amps
ipm
mm/min
Mild Steel 10 GA
1/4
1/2
3/4
1
3
6
12
19
25
45
65
65
65
65
205
145
50
24
13
5000
3900
1430
610
350
Stainless Steel 10 GA
1/4
1/2
3/4
3
6
12
19
45
65
65
65
168
120
40
19
4200
3800
1150
490
Aluminum 1/4
1/2
3/4
6
12
19
65
65
65
190
60
30
5500
1660
770

* Maximum cut speeds are the results of Hypertherm’s laboratory testing. 
For optimum cut performance, actual cutting speeds may vary based on different cutting applications. 
Refer to the operator manual for more details.