Related Links

 

Proline 2150

Proline 2150 Plasma Cutting System
  • Overview
  • Specifications

The ProLine 2150 by KALIBURN is a 150 amp precision high current density plasma cutting system that combines precise, square, and virtually dross-free cuts with excellent speeds on gauge thick metals to 1’’ (25.0mm), and it has a maximum capacity to 1 ½’’ (38.0mm). 

Uncompromising cut quality, combined with excellent processing speed and the lowest initial investment, equates to the best value in precision high current density plasma. Even competitors’ systems costing many thousands of dollars more cannot offer better cut quality to match the ProLine 2150’s productivity. 

With the ProLine 2150’s manual controls, you can tailor all of the cutting parameters to your specifications. Optionally, our patented INOVA Torch Height Control System can be built into the ProLine 2150, greatly simplifying installation.

If you need to cut gauge thicknesses through 1’’ (25.0mm) metals with square, clean, virtually dross-free edges while closely monitoring initial costs, the ProLine 2150 by KALIBURN is the machine of choice. 
Proline 2150 Torch
  • 150 amps @ 100% duty cycle
  • Dual gass
  • Liquid cooled
  • Built in initial height sensing capability
  • Plasma marking capability
Proline 2150 Power Supply
  • Rated 150 amperes DC @ 100% duty cycle
  • Advanced techology, high efficiency chopper-stabilized current output
  • 400-ampere IGBT chopper transistor for high reliability
  • Current overshoot reduction circuitry for longer electrode and nozzle life
  • Very low transferred arc current sensing for higher starting height and longer nozzle shield life
  • Fast switch transferred arc for extended nozzle life
  • 70 GPH recirculating torch coolant system
  • 0.4 amps pk - pk output current ripple at 200 amps
  • 3-phase input, 32 KVA, 208v (87a), 230v (78a), 380v (48a), 415v (44a), 460v (40a), 575v (32a)
Proline 2150 Manual Gas Console
  • Pannel mounted pressure regulators set preflow, plasma, shield, and postflow gas pressures.
  • Contains optional INOVA torch height control electronics
 Proline 2150 Cut Chart:
Material
Thickness
(in.)         (mm)
Current
(Amps)
Speed
(IPM)    (m/min)
Mild Steel
.036
0.9
30
105
2.67
.060
1.5
30
78
1.98
.105
2.7
30
55
1.40
.125
3.2
50
180
4.57
.188
4.8
70
130
3.30
.250
6.4
100
150
3.81
.375
9.5
100
100
2.54
.500
12.7
100
65
1.65
.625
15.9
150
70
1.78
.750
19.1
150
55
1.40
Material
Thickness
(in.)         (mm)
Current
(Amps)
Speed
(IPM)    (m/min)
Stainless Steel

(air plasma)
.036
0.9
30
200
5.08
.060
1.5
30
125
3.18
.105
2.7
50
75
1.91
.120
3.0
50
65
1.65
.188
4.8
70
100
2.54
.250
6.4
100
100
2.54
.375
9.5
100
80
2.03
.500
12.7
100
55
1.40